1、檢查固定式升降貨梯動臂油缸的內漏情況，最簡單的方法是把動臂升起，看其是否有明顯的自由下降。若下落明顯則拆卸油缸檢查，密封圈如已磨損應予更換。
Check the leakage of fixed cargo lifter arm oil cylinder in the most simple way is to move the arm raised, to see whether there is a significant drop in free. If the whereabouts of obvious disassemble cylinders check, seals should be replaced if worn. 

2、檢查固定式升降貨梯操縱閥，首先清洗安全閥，檢查閥芯是否磨損，如磨損應更換。固定式升降貨梯安全閥安裝后若仍無變化，再檢查操縱閥閥芯磨損情況，其間隙使用限度一般為0.06mm,磨損嚴重應更換。
Check the fixed lift cargo handling valve, first clean the safety valve, check valve is worn, such as wear and tear should be replaced. Fixed lift cargo ladder safety valve after the installation, if there is no change, and then check the valve spool wear, the gap between the use of the limit is generally 0.06mm, serious wear should be replaced. 

3、測量固定式升降貨梯液壓泵的壓力，若壓力偏低，則進行調整，加壓力仍調不上去，則說明液壓泵嚴重磨損。
Measurement of fixed cargo lifter hydraulic pump pressure, if the pressure is low, then adjust the pressure to still tune up, then pump serious wear and tear.