液壓升降平臺http://www.qdysj.net/的安裝過程中需要使用焊接技術，來進行接口處的縫合，所以焊接技術對升降機的質量也是一個重要的原因，顧客可以通過焊接點的外觀來初次檢驗升降機的質量和性能以及結實程度。
Hydraulic lifting platform installation process requires the use of welding techniques for suture interface, it lifts the quality of welding technology is also an important reason, customers can look to the initial test weld quality and performance as well as strong degree of lift .
   
可以通過雙眼觀察液壓升降平臺http://www.qdysj.net/焊接缺口處的焊接點分布，焊接處間隔最長一般不超過600mm，由于鋼鐵器材容易受到熱脹冷縮的影響，所以焊接不會完全閉合，最窄不會低于400mm，顧客可以通過強光照明或者使用放大鏡來增加肉眼觀察能力來發現焊接口處的缺陷。如果肉眼借助放大鏡都無法觀察清楚的地方，例如直徑很小的剛才管子或者精密部件的小焊縫，這種地方可以使用工業內窺鏡來進行查看。液壓升降平臺焊接處的檢查工作主要涉及以下地方：是否融合焊接劑、焊接處是否出現裂紋以及是否有氣泡等一切不正常的地方。
Can be observed through the eyes weld welding notch hydraulic lifting platform distribution, welding longest intervals of not more than 600mm, due to iron and steel equipment susceptible to thermal expansion and contraction, so welding is not completely closed, the narrowest of not less than 400mm, customers can increase the capacity by the naked eye or using a magnifying glass to light illuminated welding defects found at the mouth. Magnifying glass can not be observed clearly places such small diameter pipes or just a small weld precision parts, industrial endoscope can use this place to see if the aid visually. Check the hydraulic lifting platform welding work mainly involves the following places: whether fusion solder, weld cracks and whether there is a bubble and all the unusual places.